Golden Fry Tech | Maintenance of Oil Saving Plates

The Product

How to Clean and Maintain GFT

How to Clean and Maintain Golden Fry Tech Plates

11x17 Printable GFT Cleaning and Maintenance Poster (pdf)

When to Change Oil
GFT plates allow your cooking oil to work efficiently long after the color darkens so do not to use oil color as an indicator for when to change your oil. You will not see maximum use of your oil if you use oil color as a guide. Instead, use the following as your guide on when to change your oil:

Food color is darker than usual and unappetizing.
Oil is smoking.
The oil smells bad or is thicker than usual.
If indicated by oil test strips
(i.e. 3m Shortening Monitor).

HOW TO CLEAN AND MAINTAIN YOUR GOLDEN FRY TECH PLATES

Step 1
Wash the GFT plates at least two to three times a week and when you change the frying oil.
Step 1 in cleaning Golden Fry Tech

Step 2
To open the stainless steel jacket, snap the latches off with your fingers or use a screwdriver. Then remove the titanium plate.
Step 2 in cleaning Golden Fry Tech

Step 3
Wash the stainless steel jacket and titanium plate separately with dish washing detergent and a soft sponge. Because the catalyst is printed over the titanium plate surface, do not use scrubbing pads or wire brushes. After washing, rinse with hot water. If dishwashing machine is available, you may use this to wash the stainless steel jacket and titanium plate. Step 3 in cleaning Golden Fry Tech

Step 4
FOR YOUR SAFETY, COMPLETELY WIPE AND DRY BOTH THE INNER PLATE AND THE STAINLESS STEEL JACKET BEFORE REASSEMBLING. PLACE IN THE FRYER WHILE THE OIL IS STILL COOL.. Step 4 in cleaning Golden Fry Tech